Motorcycle Generator
add-on
Photoreal procedural motorcycles: 12 types and 25 real-world designs from superbikes to choppers and scooters, 22 rim styles, brand new to rusty, PBR materials.
Motorcycle Generator builds photorealistic motorcycles inside Blender, from superbikes and naked roadsters to cruisers, choppers, bobbers, café racers, scramblers, motocross bikes, big adventure tourers, baggers, classic standards and scooters. Pick a type, pick one of 25 designs modeled on real bikes, pick a condition from brand new to rusty, and press Add.
Then change anything. The sidebar is picture-driven: frames, forks, engines, exhausts, mufflers, rims, treads, tanks, seats, fairings, fenders, handlebars, headlights, mirrors, gauges, tail lights and luggage are chosen from rendered thumbnails of the actual result, so you never guess what an option does. Every measurement is a slider: wheelbase, rake, trail, wheel and tire sizes, seat height, tank and seat shape, bar width and rise, engine size and tilt, and many more. Each tab shows its pictures first and its sliders under them, and the detailed frame geometry stays folded away until you open it, so the panel never overwhelms.
The bikes are modeled, not faked: laced spokes and nipples, drilled and floating discs with calipers, chains with real links, cooling fins, cables and hoses, stitched seats, lenses with reflectors, number plates and indicators. Condition is a full wear system: chipped and faded paint, scratches, grime, mud, rust that eats into bare steel, flat tires and sagging springs. Materials are PBR texture sets ready for game engines.
Features
- 12 types and 25 real-world designs, plus Surprise Me for endless random bikes of any type
- 4 conditions: Brand New, Used, Old and Rusty, with wear, fade, rust, dirt, mud, flat tire and sag sliders
- 22 rim styles with thumbnails: wire, tubeless wire, 80-spoke, off-road, 3 to 10-spoke cast, Y-spoke, split, turbine, forged, mag star, Comstar, solid and holed discs, billet, mesh, spider and scooter steel
- 7 frames, 5 forks, 4 swingarms, 3 rear suspensions
- 8 engine layouts from single to inline four, boxer and electric, air or liquid cooled, chain, belt or shaft drive
- 10 exhaust routes and 8 muffler shapes
- 9 tire treads, single, dual and drum brakes, 4 disc styles
- 10 tanks, 8 seats with 4 stitch patterns, 7 fairings, fenders, tails and side panels
- 9 handlebars, 9 headlights, mirrors, gauges with real dials, tail lights, indicators and a number plate
- Luggage, racks, top box, crash bars, skid plate and sissy bar
- 19 color slots with 46 PBR materials: paints, metallic flake, chrome, brushed and cast aluminium, carbon fibre, leathers, rubber and glass
- Steering, side stand lean and wheel spin pose without a rebuild; Low to High detail; Make Static for export
- Shift+A menu; works in Cycles and EEVEE
Requires Blender 4.2 or newer. Tested on Blender 4.2, 4.5 and 5.2 LTS.
How to use
Installation
In Blender open Edit, Preferences, Get Extensions, then use Install from Disk and pick the motorcycle_generator zip.
Usage
- Open the Motorcycle tab in the 3D viewport sidebar (N). With no bike selected, follow the three steps: pick a type, pick a design and pick a condition (New, Used, Old or Rusty), then press Add Motorcycle to place it at the 3D cursor. You can also use Shift+A, Mesh, Motorcycle.
- With a bike selected, the top of the panel shows its type, design and condition as pictures you can change at any time. Surprise Me makes a new random bike of the same type, New Colors repaints it and New Details changes the small random variations. Reset to Design undoes every change.
- The icon tabs hold every setting: Frame & Suspension (frame, fork, swingarm, shocks, measurements), Engine & Exhaust (layout, cooling, air filter, drive, exhaust, muffler), Wheels & Brakes (rims, tires, brakes, discs), Bodywork (tank, seat, fairing, fenders, tail, side panels), Cockpit & Lights (handlebar, mirrors, headlight, gauges, tail light, footpegs), Luggage & Extras (luggage, rack, crash bars and more), Paint & Materials (every color slot), Condition & Pose (wear, rust, dirt, mud, flat tires, sag, steering, stand) and Output (detail, part visibility, Make Static, Delete).
- Picture buttons open a grid of every option. The detailed frame geometry (wheelbase, rake, trail and more) opens under Measurements in the first tab.
Materials are PBR texture sets on metric UVs, so the meshes export cleanly to game engines. Make Static turns the bike into plain meshes for export or hand editing.
FAQ
Which Blender versions are supported?
Blender 4.2 and newer. It is tested on Blender 4.2, 4.5 and 5.2 LTS.
Can I use the motorcycles in a game engine?
Yes. Materials are Principled BSDF with PBR texture sets (color, roughness, normal) on metric UVs. Make Static in the Output tab turns the bike into plain mesh objects, ready to export as FBX or glTF. Low detail gives lighter meshes.
How detailed are the motorcycles?
A bike at Medium detail is about 30,000 to 50,000 faces, with laced spokes, chain links, cooling fins, cables, stitched seats and modeled lenses. High detail adds more segments for close-ups.
Can a bike be posed or animated?
Steering, side stand lean and wheel spin are object transforms, so they move instantly and can be keyframed without rebuilding the bike.