Bridge Generator for Blender
add-on
Click two points and get a textured bridge: 52 real-world designs in 12 types, from rope and stone arches to steel trusses, cable-stayed and suspension bridges, with supports that follow the ground.
Bridge Generator builds a complete, textured bridge between any two points in your scene. Click where the bridge starts, click where it ends, and it spans the gap: the deck follows the line, piers and towers reach down to the real ground under them, and abutments sit into the banks. Change the terrain and the supports adjust by themselves.
Pick from 52 designs modeled on real bridges, from a jungle rope bridge or a mossy forest footbridge to a Roman aqueduct, a red covered bridge, a Japanese taiko arch, a riveted railway truss, a Sydney-style steel arch, a harp cable-stayed bridge or the Golden Gate. Every design is fully editable: span, width, arches, piers, trusses, cables, railings, lamps and materials are all plain settings in the sidebar, and the bridge rebuilds live while you drag.
Materials are real PBR textures (wood, stone, brick, concrete, asphalt, painted and rusty steel, rope) with weathering decals for leaks, cracks, grime and rust, so the bridges work in Cycles, EEVEE and game engines alike.
Features
- Two-click Create Bridge tool, plus Add at Cursor
- 12 bridge types and 52 real-world designs in a picture gallery
- Wooden, rope, covered, Japanese, stone arch, brutalist concrete, highway girder, modern footbridge, steel truss, steel arch, cable-stayed and suspension
- Supports follow the ground automatically: piers, trestles, towers and abutments
- Hump, sag and sloped bridges between banks at different heights
- Railings, parapets, lamps and lanterns in many styles
- PBR textures and weathering decals, one mesh object per bridge
- Low, Medium and High detail: Low is game-ready
- Randomize, Swap Ends and Repick Ends buttons
Requires Blender 4.2 or newer. Tested on Blender 4.2, 4.5 and 5.2 LTS.
How to use
Installation
In Blender open Edit, Preferences, Get Extensions, then use Install from Disk and pick the bridge_generator zip.
Usage
- Open the Bridge tab in the 3D viewport sidebar (N).
- Pick a bridge type and a design from the picture gallery.
- Press Create Bridge, click the start point and then the end point in the viewport. The mesh under the first click becomes the terrain the supports follow. While placing, Q and E cycle designs and L levels the ends.
- Change any setting in the sub-panels (deck, supports, railings, lights, look and the type's own structure); the bridge rebuilds live.
- Use Repick Ends to move an existing bridge, Swap Ends to flip it and Randomize for a variation.
Set Detail to Low for game-ready meshes.
FAQ
Which Blender versions are supported?
Blender 4.2 and newer. It is tested on Blender 4.2, 4.5 and 5.2 LTS.
Can I use the bridges in a game engine?
Yes. Materials are PBR image textures, and the Low detail level gives light, game-ready meshes. Each bridge is a single mesh object you can export.
Does the bridge follow my terrain?
Yes. The mesh under your first click becomes the terrain, and piers, towers, trestles and abutments reach down to it. Sculpt or move the terrain and the bridge updates.
Does it work in EEVEE?
Yes, in both Cycles and EEVEE.